|
|
|
|
An example of chatter work in the depth of a sample box top
|
|
|
|
Hollowing out the rest of the box top with negative rake scrapers
|
|
|
|
The inside of the top ready to have the female threads cut
|
|
|
|
Cutting the female threads in the box top
|
|
|
|
Inside of the box top finished and the threads cleaned up with a tooth brush
|
|
|
|
|
|
Hollowing out the bottom of the box
|
|
|
|
Cutting the male threads in the box bottom
|
|
|
|
The top has been threaded onto the bottom and is now shaped on the outside
|
|
|
|
Showing the box top free and the bottom on the lathe
|
|
|
|
The top and bottom have been shaped and are now polished
|
|
|
|
|
|
The shaping is done and the bottom is ready to be reversed mounted
|
|
|
|
Preparing the jam chuck for the box bottom
|
|
|
|
Shaping the bottom of the box
|
|
|
|
Adding chatter work to the bottom of the box
|
|
|
|
View from inside of the box top
|
|
|
|
|
|
Outside of the box top
|
|
|
|
Finished acrylic threaded-box
|
|
|
|
Sample of inside clear acrylic box top decorated with Rose Engine
|
|
|
|
Outside of the same clear acrylic box top
|
|
|
